HL-SW01R-AT HL-SW01P-AT
RS232 to Wifi
Wireless 802.11b/g/n
HL-SW04P-AT
RS232/422/485 to Wifi
Wireless 802.11b/g/n
相關商品
RS232轉藍牙 500
公尺
HL-MD09P-C1P
相關商品
RS232轉USB藍牙
HL-MD09P-C1
相關商品
RS485/422轉藍牙
HL-MD04P-C1
產品概觀  產品特色  產品規格  產品應用圖

產品概觀:

Serial UART 轉 Wireless 802.11b/g/n 模組

HL-SW01R-AT User Manual 使用手冊

    HL-SW01R-AT 能快速直接升級傳統UART成為無線Wifi傳輸, 讓將有線的UART設備簡單的轉換為無線傳輸. 可適用RFID, 血壓計, 條碼掃描器, 字幕機, 藍芽實驗, 專題製作 ...

    HL-SW01R-AT 是全雙工的串列通訊與Wireless TCP/IP通訊的資料轉換器,透過HL-SW01R-AT您可以輕鬆的將串列設備連接至乙太網路. 經由將UART資料送上Ethernet甚至Internet. 當然您也可以由遠端經LAN, WAN 及 Internet 將資料送入連接Serial的設備.

    當HL-SW01R-AT會自動轉換為TCP/IP 封包由Ethernet 端轉送至其所指定TCP Server之IP及Port. 並支援WinSock協定.


主要特色:

● Wireless standard: IEEE 802.11b, 802.11g, 802.11n (single stream)
● Modulation Modes CCK and OFDM with BPSK, QPSK, 16 QAM, 64QAM
● Hardware Encryption WEP, WPA/WPA2
● Advanced 1x1 802.11n features Full/Half Guard Interval
● Low Density Parity Check (LDPC) Encoding
● Supports Baud Rate 4800 to 921600 bps.
● Supports Ad-Hoc Mode in Wireless Networking.
● Supports AT Command.

產品規格:

Model Name

HL-SW01R-AT

 

 

Network Standard

802.11b, 802.11g, 802.11n (single stream)

Frequency

2.400GHz ~ 2.497GHz (2.4 GHz Band)

Channels

14 channels

Modulation Method

CCK and OFDM with BPSK, QPSK, 16QAM, 64QAM

Hardware Encryption

WEP, WPA/WPA2

Spread Spectrum

 

Signal

TxD, RxD, GND

Transfer Baud Rate

Supports 4.8/9.6/19.2/38.4/57.6/115.2/230.4/460.8/921.6kbps

AT Comand Mode

Command mode & data mode

Data Bit

8

Stop Bit

1

Parity

None

Output Power

17bBm @ 802.11b

13bBm @ 802.11g

11bBm @ 802.11n

Tx Power

 

Rx Sensitivity

 

Antenna

PCB Printed Antenna

Coverage

Up to 10 meter

Current Consumption

Max. 500 mA

Input Power

5V DC

Operating Temperature

0 ~ +60

Storage Temperature

-10 ~ +70

Dimensions

30x18x3(H)mm

產品應用圖:

 

 

 

 

 

HotLife Electronic Technology Co., Ltd. All rights reserved.    rs232@hotlife.com.tw